Jig A Low
BASSACKWARDS BASS CLUB
Online
2438 posts
Chesapeake va
|
| Re: Lets See Some True Accurate Numbers (kblanchardjr) » | 9:04 AM 7/19/2009 |
Reply
Edit
|
2000 sprint 221 pro
2000 Merc. 225 EFIaverage 72 gps at 5800 running a 25 Tempest +, 3.25" below the pad.
Modified by sprint_lover at 5:50 PM 10/6/2009 
|
Bassmeister
In Memory of "SPLASH"
Offline
22687 posts
Calhoun Ga
|
| Re: Lets See Some True Accurate Numbers (sprint_lover) » | 3:59 PM 7/20/2009 |
Reply
Edit
|
98 Sprint 207
03 225 Rude DI
73.4 GPS @ 5700 rpms with a Raker 26
T loaded with 2 people 69 GPS with 27 Gade
|
meallenjr
Member
Offline
112 posts
Kingwood tx
|
| Re: Lets See Some True Accurate Numbers (kblanchardjr) » | 7:26 PM 7/20/2009 |
Reply
Edit
|
1998 296 PRO 200hp Johnson(carb)
25p renagade 5800-6000rpm 59.3 gps
I think I need to lower the motor have not checked the height
|
Mytus
Member
Offline
12 posts
Sumter SC
|
| Re: Lets See Some True Accurate Numbers (meallenjr) » | 11:35 PM 7/26/2009 |
Reply
Edit
|
1998 Sprint 267S
1998 Johnson 90hp SPL
17P 3 Blade Aluminum Prop39.5 GPS at 5600 RPM WOT For my first boat...that's plenty fast!!!
|
ixlr8ed
Roll Tide!!!
Offline
337 posts
Chelsea AL
|
| Re: Lets See Some True Accurate Numbers (Mytus) » | 10:11 AM 7/27/2009 |
Reply
Edit
|
1998 207 Pro
200 Merc EFI
25 Tempest +
68.6 GPS WOT 5950 RPMJay Peoples
1998 Sprint 207 Pro
1998 Mercury 200 EFI
|
Vyper202
The WOLF Brothers
Offline
2244 posts
Phenix Va
|
| Re: Lets See Some True Accurate Numbers (ixlr8ed) » | 6:32 PM 7/30/2009 |
Reply
Edit
|
Dont have mine any more....  P&J FISHING ENTERPRISES
"HIGH PERFORMANCE FISHING"
www.pandjfishing.com
Blazer 202 DC - 300 Hammer
Run it to the limiter....Its under warranty!!!...
|
Bassmeister
In Memory of "SPLASH"
Offline
22687 posts
Calhoun Ga
|
| Re: Lets See Some True Accurate Numbers (Vyper202) » | 8:56 PM 7/30/2009 |
Reply
Edit
|
WHAT???? First ya stay away and then come back with a tidbit like that!! You OK bud?? 
|
basshammer48
Power Angler
Offline
271 posts
lake martin al
|
| Re: Lets See Some True Accurate Numbers (Bassmeister) » | 1:01 PM 7/31/2009 |
Reply
Edit
|
1999 296 pro
2001 vmax 200hp (modified  )
solo w/ no load 78.7
two persons and gear 75.2
|
LeeinAlabama
Member
Offline
610 posts
Birmingham Al.
|
| Re: Lets See Some True Accurate Numbers (kblanchardjr) » | 6:48 PM 8/5/2009 |
Reply
Edit
|
2000 221DC 12" plate jacked throught the roof. Turning 29T1 6000, Powered by Yamaha HPDI, 80 + a litle bit. 
|
Bassmeister
In Memory of "SPLASH"
Offline
22687 posts
Calhoun Ga
|
| Re: Lets See Some True Accurate Numbers (LeeinAlabama) » | 8:02 PM 8/5/2009 |
Reply
Edit
|
| Quote, originally posted by LeeinAlabama » | | 2000 221DC 12" plate jacked throught the roof. Turning 29T1 6000, Powered by Yamaha HPDI, 80 + a litle bit. |
A little bit.....Yea.... Where ya been prodigal?? 
|
Vyper202
The WOLF Brothers
Offline
2244 posts
Phenix Va
|
| Re: Lets See Some True Accurate Numbers (Bassmeister) » | 5:45 PM 8/6/2009 |
Reply
Edit
|
Man....work work work....need buy props......work work work.... P&J FISHING ENTERPRISES
"HIGH PERFORMANCE FISHING"
www.pandjfishing.com
Blazer 202 DC - 300 Hammer
Run it to the limiter....Its under warranty!!!...
|
LeeinAlabama
Member
Offline
610 posts
Birmingham Al.
|
| Re: Lets See Some True Accurate Numbers (Bassmeister) » | 6:38 PM 8/6/2009 |
Reply
Edit
|
I'm here.
Been doing the TBF and Federation Nation trails. We are done until the Championships this fall. 
|
Bassmeister
In Memory of "SPLASH"
Offline
22687 posts
Calhoun Ga
|
| Re: Lets See Some True Accurate Numbers (LeeinAlabama) » | 8:30 PM 8/6/2009 |
Reply
Edit
|
Well, the OTHER prodigal shows up!!! Glad to hear from ya both!!
|
Rooster Tails
Member
Offline
114 posts
Central LA
|
| Re: Lets See Some True Accurate Numbers (kblanchardjr) » | 2:48 PM 8/7/2009 |
Reply
Edit
|
'91 275
Mid 80's 2.4 liter 200HP Mariner
6" Vance Manual Jackplate
62MPH (gps) turnina a 26P Turbo M 6,000 RPM 3.25" below the pad with some hot foot left but wouldn't go any more cause the oil injection is still hooked up.
Got a 27P A40 Tempest on the way. Will update when I get it installed and tested a bit.Got the 27P A40 Tempest on. Hole shot is real slow, but once up, I bumped 70mph on the GPS @ 6,000 RPM. I also raised the motor a little.
Modified by Rooster Tails at 9:48 AM 8/24/2009
Modified by Rooster Tails at 2:42 PM 11/16/2009
Rooster Tails
Sprint 275/200 Mariner
Central Louisiana
|
bluewingjb
Bluewing
Offline
84 posts
Templeton Ma
|
| Re: Lets See Some True Accurate Numbers (Rooster Tails) » | 10:32 PM 8/11/2009 |
Reply
Edit
|
99 DC 207 Limited with a 225 Mariner Super Mag on a manual plate up about 3 inches. 62+ with a 24pitch at 5300 and 62+ with a 22pitch at 6000 but with this prop the speed is still increasing so I dont know what top end would be. The lakes here in Mass are not that big.. How long does it take to get to top end with a rig like mine?? Wes Billings
FTC/SS USN Retired
|
jigslinger
sling'n it at um
Offline
180 posts
vidalia la
|
| Re: Lets See Some True Accurate Numbers (bluewingjb) » | 3:32 PM 8/12/2009 |
Reply
Edit
|
1998 277 Pro Tournament
1998 Promax 2.5L 150
24P Fury Prop
66.1 GPS @ 6350 RPM
|
emo6921
Evan O'Brien
Offline
9 posts
Mesquite TX
|
| Re: Lets See Some True Accurate Numbers (jigslinger) » | 9:13 PM 8/12/2009 |
Reply
Edit
|
2000 Pro Tournament 286
Mercury 150xr6
56.0 GPS turning 5600 rpms
thinking i need to get a 6" jackplate to get the back end out of the water and maybe hit 60
|
FAST-J
Member
Offline
32 posts
Greenville Ms
|
| Re: Lets See Some True Accurate Numbers (emo6921) » | 9:31 PM 8/20/2009 |
Reply
Edit
|
1998 Sprint 277 Pro
2.6L HydroTec built Yamaha
Motor was a 150, still has 2.0 gears
Prop, 29 Tempest worked by Jay Martin PropellersTop speed 83.4 @ 6200 rpm
|
basswrencher
Member
Offline
21 posts
Louisville KY
|
| Re: Lets See Some True Accurate Numbers (kblanchardjr) » | 10:28 PM 8/21/2009 |
Reply
Edit
|
99 221 DC with 225 Merc EFI---running a 26 Trophy hit 76.1 with a very light load. Not the best holeshot.
I usually run a 25 Trophy to carry a load and with two and a decent load can still run 73-74 GPS with not too much problem---turning 5800.I have done a few little mods to the motor---switched to 250 Fuel ECM, changed to newer style 4 butterfly intake manifold,cut exhaust tuner,Simons solid motor mounts,Simons Popit Valve, Boyesen Reeds and modded cowling(raised with air holes cut in them)
Runs real good! I am happy. I removed the trolling motor to do some work to it and want to run it without a troller to see how much it will pick up the nose.
I will let you all know.
|
bamablacksmith
Member
Offline
237 posts
McCalla AL
|
| Re: Lets See Some True Accurate Numbers (kblanchardjr) » | 12:36 PM 8/30/2009 |
Reply
Edit
|
2000 296Pro 200 Optimax68.6 GPS @ 5400 turning a 25P Tempest Plus with full T-load Had to play a lot with the PVS ports to keep it from blowing out. Mike Linn
Artist Blacksmith
Bass Fisherman
Sprint 296Pro / Optimax 200L
McCalla, AL
|
MGBrad84
Member
Online
144 posts
Ashland Va
|
| Re: Lets See Some True Accurate Numbers (kblanchardjr) » | 5:02 PM 10/31/2009 |
Reply
Edit
|
98' 207 Pro w/ 98' 200 Evinrude Vindicator 25p RenegadeBest speed to date - 66.5 MPH GPS @ 5750 RPM
I'm just bassin' on a budget
98' SPRINT 207 PRO
200 Rude Vindicator
|
TrueSouth
Truesouthlures.com
Offline
194 posts
Monroe NC
|
| Re: Lets See Some True Accurate Numbers (MGBrad84) » | 1:27 PM 2/24/2010 |
Reply
Edit
|
2002 Sprint 221 12 in jackplate, 01 200 vmax 27p TI 72 GPS 5600
|
LeeinAlabama
Member
Offline
610 posts
Birmingham Al.
|
| Re: Lets See Some True Accurate Numbers (Bassmeister) » | 8:18 PM 3/7/2010 |
Reply
Edit
|
Just ran a new prop. A Mercury Racing lab finished 27-1/2" Bravo 1. Awsome hole shot and turning it to the limiter "6200"
80 + a little bit more. 221 DC w/ 12'' plate running a Yamaha HPDI 
Modified by LeeinAlabama at 1:03 PM 3/9/2010
|
| |
