Any of you guys ever installed a recessed foot pedal on these boats... I am very interested in doing it in the next couple of weeks and any tips would be appreciated! Thanks in advance! Cole
Hey Cole, As long as you have room for a kit and make sure you don't have a MAJOR support or even a wiring harness up in that area, you should be fine. The cutout size for ours is 9-7/8"x19-1/8". The tray depth is 4" deep. If you have any questions feel free to call me at 417-862-6512, Be glad to help out in any way.
You should be good to go there is no wires there, the t/m wires and control wires run down the gunnels on your boat ,and there should be plenty of depth,,I can't rememeber off hand but the supports im pretty sure sit further back near the seat post
